Because of the addition of magnesium, 5 series aluminum alloy has higher strength, good weldability and corrosion resistance. Aluminum plate bending fan blades are generally made of 5052 aviation-grade aluminum alloy plates, which are light and strong fan blades formed under advanced bending technology.
Specification of GNEE 5052 aluminum sheet for industrial ceiling fan blades
| 5052 | |
| H12, H22, H32, H38, H112 | |
| 1.5-3mm | |
| 1000-2000mm | |
| 3000-6000mm | |
| Double-sided polished or Single-sided polished | |
The material of the ceiling fan blades is critical to performance. Using lightweight but strong aluminum alloy materials, such as 5052 aluminum plate, can provide high strength, good corrosion resistance and thermal conductivity, reduce motor load and save energy.
Surface treatment of the blade, such as spraying or anodizing of 5052 aluminum plate, can increase its corrosion resistance, wear resistance and aesthetics.
Advantages of 5052 aluminum sheet for ceiling fan blades
Lightweight and high-strength
Mechanical properties of gnee 5052 industrial ceiling fan blade aluminum plate
| non-proportional tensile strength /Mpa | ||||
| H12 | >0.20-0.50 | 210-280 | 180 | 4 |
| >0.50-1.50 | 5 | |||
| >1.50-3.00 | 5 | |||
| >3.00-6.00 | 8 | |||
| H22, H32 | >0.20-0.50 | 210-260 | 130 | 5 |
| >0.50-1.50 | 5 | |||
| >1.50-3.00 | 7 | |||
| >3.00-6.00 | 10 | |||
| H38 | >0.20-0.50 | 270 | 210 | 3 |
| >0.50-1.50 | 3 | |||
| >1.50-3.00 | 4 | |||
| H112 | >6.00-12.50 | 190 | 80 | 7 |
| >12.50-40.00 | 170 | 70 | - | |
| >40.00-80.00 | 170 | 70 | - |
